شكرا على الشرح الجميل ده بس انا بعد التربو بوت مش هلعب بيى اى بوت تانى

شكرا للادارة لتثبيت الموضوع

مشاكل ممكن تحصل معاك
Howto fix the closing nuConnector when starting sro:

1.Open nuConnector Config.exe
2.Edit the ip from 121.128.133.26 to 121.128.133.27
3.Click on "Create Config File"
4.Click on "Ok"
5.Bot as always without closing Nuconnector



Howto Multiclient with Revbot & Loader v6:

* First you need a clean & up to date Version of Silkroad
* Then extract the Loader in it
* Copy the whole Silkroad Folder to a other Location and Rename it to any Name For example "Bot"
* Then extract the Revbot 1.4.7.2 Package in the Second Folder "Bot", und start Mediapatcher.

Now how to use it:
* Go back to clean Silkroad Folder & Start Loader.exe,
* Login your Stall char or the one you want to LVL
* Go to the Second Folder, called "Bot", start NuConnector.exe, than start agbot.exe and then Loader.exe,
* Login the char that will Bot
* now you have 2 chars logged in, hf


Skill Delay Fix

To fix the skill delay go to your C:\Program Files\Silkroad\data and open skill.txt

There you search for the skill that you are using. Like you're using silkroad4arab-flame (example), go and search for silkroad4arab-flame.

If u found it, then you need to change the numbers in the line as following;

After the first number which is the level of the the skill, change the next 5 numbers to 0.
Leave the next 6 numbers as they are and change the last number to 0. Do all your attack and imbue skills this way.

Example:


First you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,60000,15000,182,0,1,257,2,0,1


And after editing you have this

"1B000000","SKILL_CH_SWORD_SHIELD_A_01","Castl e shield",10,0,0,0,0,0,182,0,1,257,2,0,0



Vista Problems (and sometimes WinXP):



Missing .ocx Files
Some people are getting error 339 (Missing .ocx file).
This are most of the time two files, first VbEclipse.ocx and after that comctl32.ocx and comdlg32.ocx. What to do with this error:


You need to have the three files: Click here


Put the three files in your system32 map (C:\Windows\System32\). Stay in the system32 map and search for cmd. RightClick on it and run it as an admin. The command prompt will open. Type: "regsvr32 C:\Windows\System32\VbEclipse.ocx" without "" and press enter. It'll say the file is registered.

Another line to fill in: "regsvr32 C:\Windows\System32\comctl32.ocx" without the "" and press enter again.

And the last file to register: type: "regsvr32 C:\Windows\System32\comdlg32.ocx" without the "" and press enter for - finaly - the last time



MOST QUESTIONS ABOUT THIS: agBot DOESN'T SHOW UP!!! (Vista)
If you work with XP, try installing the library files. On the bottom of this thread you can find a link!!!
This has to do with the Admin stuff. Solution:
First if you have patched with MediaPatcher, unpatch it.

After that, go to your silkroad folder (Standard: C:\Program Files\Silkroad) and select agBot.exe, nuConnector.exe and MediaPatcher.exe. One by one please . Right click on the file you selected and click properties, then select it to run as an administrator.
Patch the game and now it should have fixed the problem. But don't forget to run the bot and nuConnector as an admin!!!

thnx

tx

بس لما انزل البوت
مش راضى بنفتح ممكن حق يقول ليه

يا عم مالك زعلان لية هو انا بشوفك من اصلو
ولا اروح البيت عندك وقول امك ناديلى احمد عايزانزلو البوت ^_^

انا عندى مشكله بعمل كل حاجه بس لما بعمل الباتش و اجى اشغل العلبه مش بتشتغل

لو سمحت انا معرفش القرجن الجديد ابعتوا بعد ازنك فى رساله وشكرا

شكرااااااااااااااااااااااااااااااا

بص انا مش عارف فين اشرح بالفيديو ارجو الرد

الأن شرح بالصور للAgBot الجديد [موضوع متجدد] **تم التحديث بتاريخ 30 مارس 2008**

--------------------------------------------------------------------------------

الأول قبل ما نبدأ دي روابط للAgBot بتاريخ النهارده <30 مارس 2008>
** تم تحديث الروابط و تم وضع روابط للنسخة الجديدة**
agBot 1.6.1 Rapidshare
agBot 1.6.1 Filefront
و دي Maps مش عارف فايدتها ايه بالظبط بس دي بتتفك في فولدر البوت
agBot Maps Rapidshare
agBot Maps Filefront


Library files عشان مايظهرش error لما تيجي تشغل البوت
http://www.ascentive.com/support/new/libraryfiles.exe

فيديو لطريقة تشغيل البوت
Video Guide
Walkback-Script Video Guide

طريقة تشغيل البوت

اول حاجه فك ضغط الملفات و حطها فى فولدر و سميه اى اسم انت عايزة
فى الفولدر اللى انت حطيت فيه الفايلات هتلاقى فايل اسمه MediaPatcher.exe
اعمله كوبى و حطه فى الفولدر بتاع اللعبه , اللى مكانها الاصلى بيبقى c:\Program Files\Silkroad.
تأكد دلوقتى ان اللعبه مقفوله و بعدين افتح فايل Mediapatcher.exe اللى حطيتو فى فولدر اللعبه
لما تفتح فايل Mediapatcher.exe هتلاقى كده

دوس Ok

دوس Ok

دوس Yes

دوس Ok

دوس Ok
دلوقتى ال media.pk2 اتعملها باتش علشان تشتغل مع البوت
بعد الخطوه دى هتلاقى ملفين بأسم ip.bak و port.bak
متمسحهومش علشان لما تحب ترجع اللعبه تشتغل من غير بوت هتحتاجهم
دلوقتى شغل nuconnector.exe
هتلاقيه فى الفولدر اللى انت فكيت ضغط الفايلات فى الاول فيه
لما تفتحه هتلاقى مكتوب listening for bot connection
اضغط هنا لمشاهدة الصوره بحجمها المصغر

دلوقتى شغل فايل agBot.exe
هتلاقى بعد لما تشغله مكتوب فى صفحه ال nuconnector.exe
listening for sro_client.exe


ana waslt l3`ayt hna we mesh 3ady yegyb el klma ele b3deha

plz help me

بصو يا جماعه اللى مش عارف يشغله يمسح كل اللى عمله ويمشى مع الشرح واحده واحده لانى حصل معايا كده وفى الاخر اشتغل والحمد لله
بس ممكن اعرف حاجه واحده انا عايزه البوت يضرب وبس مش يلم ولا اى حاجه اعمل ايه

شكراااااااااا وجارى التجربة