| Dev.Ri3o |
05-12-2017 03:09 PM |
رد: PROBLEM>>>>>>!!!
بالنسبة لل FGW هتعمل ال Query ده
كود:
USE [SRO_VT_SHARD]
GO
/******By Jangan ******/
/******Fix By Asuradoll ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[_AddTimedJob]
@CharID int,
@Category tinyint,
@JobID int,
@TimeToKeep int,
@Data1 int,
@Data2 int,
--##begin due to develop composite item
@Data3 int,
@Data4 int,
@Data5 int,
@Data6 int,
@Data7 int,
@Data8 int,
@Serial64 bigint,
@JID int
--##end due to develop composite item
as
if (not exists (select CharID from _Char with (nolock) where CharID = @CharID))
return -1
if (@TimeToKeep <= 0)
return -2
declare @NewJobID int
set @NewJobID = 0
--##JobID 1 = Guild // JobID 2 = Thief/Hunter/Trader
--##If you want to only have one not both, then just modify the line below!
--if (@JobID = 1 and @Category = 2 and @Serial64=0) or (@JobID = 2 and @Category = 2 and @Serial64=0) --For Guild and CharJob
if (@JobID = 1 and @Category = 2 and @Serial64=0) --Only for Guild
BEGIN
set @CharID = 0
insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
END
ELSE
BEGIN
--##begin due to develop composite item
insert into _TimedJob(CharID,Category,JobID,TimeToKeep,Data1,Data2,Data3,Data4,Data5,Data6,Data7,Data8,Serial64,JID)
values(@CharID, @Category, @JobID, @TimeToKeep, @Data1, @Data2, @Data3, @Data4, @Data5, @Data6, @Data7, @Data8, @Serial64, @JID)
END
--##end due to develop composite item
set @NewJobID = @@identity
if (@@error <> 0 or @@rowcount = 0)
return -3
return @NewJobID
http://www14.0zz0.com/2017/11/30/19/819176216.gif
وال MagicPop كدة السطر بتاع ال Tab_RefNest بتاعها ممسوح ضيف السطر ده فى ال Tab_RefNest وجرب وشوف
كود:
11112 2 1118 25000 1612.97 0 1193 32767 0 0 0 0 0 1 0 1 0
26441 12 1118 26959 444.24 80.32 225.94 16565 0 0 0 0 0 1 0 1 0
26458 301 1118 27244 913.69 180 1828.76 16565 0 0 0 0 0 1 0 1 0
26461 5 1118 26265 543.91 -106.74 1533.36 16565 0 0 0 0 0 1 0 1 0
26508 6 1118 23687 1652.38 243.82 776.57 -26215 0 0 0 0 0 1 0 1 0
29291 554 1118 23088 1364.37 863.36 1130.77 23665 0 0 0 0 0 1 0 1 0
لو دى منفعتش يبقى لازم تعملها انت New Spot بال Query ده ده ال CodeName بتاع ال NPC
NPC_CH_GACHA_MACHINE
وتوقف Char وتعمل Spot فى المكان اللى انت عايزو , بس تخلى Identity بتاع ال Tab_RefNest و Tab_RefTactics و Tab_RefHive تبقى Yes عشان ال Query يشتغل معاك
كود:
USE SRO_VT_SHARD /* Add Unique Spot By Arabianfox */
DECLARE @UNIQUE VARCHAR (129)
DECLARE @CHARNAME VARCHAR (64)
DECLARE @mindealy INT
DECLARE @maxdelay int
DECLARE @INITRADIUS INT
DECLARE @RADIUS int
DECLARE @MAXNEST int = (SELECT MAX (dwNestID) FROM Tab_RefNest)+1
DECLARE @MAXHIVE int = (SELECT MAX (dwHiveID) FROM Tab_RefHive)+1
DECLARE @MAXTACTICS int = (SELECT MAX (dwTacticsID) FROM Tab_RefTactics)+1
/* put your settings here */
SET @UNIQUE = 'MOB_JUPITER_YUNO' -- Unique code name from _RefobjCommon table
SET @CHARNAME = 'CHARNAME' -- Character name from _Char table to get mob position X Y Z
SET @mindealy = 60 -- Minimum time before appears in seconds
SET @maxdelay = 120 -- Maximum time before appears in seconds
SET @INITRADIUS = 100 -- Radius around spot unique can generated at
SET @RADIUS = 500 -- Radius around spot Unique can move in
/* end of settings area */
/* get ID of mob by code name */
Declare @MOBID int SET @MOBID = (SELECT ID FROM _RefObjCommon WHERE CodeName128 = @UNIQUE)
SET IDENTITY_INSERT Tab_RefTactics ON
INSERT INTO Tab_RefTactics (dwTacticsID,dwObjID,btAIQoS,nMaxStamina,btMaxStaminaVariance,nSightRange,btAggressType,AggressData,btChangeTarget,btHelpRequestTo,btHelpResponseTo,btBattleStyle,BattleStyleData,btDiversionBasis,DiversionBasisData1,DiversionBasisData2,DiversionBasisData3,DiversionBasisData4,DiversionBasisData5,DiversionBasisData6,DiversionBasisData7,DiversionBasisData8,btDiversionKeepBasis,DiversionKeepBasisData1,DiversionKeepBasisData2,DiversionKeepBasisData3,DiversionKeepBasisData4,DiversionKeepBasisData5,DiversionKeepBasisData6,DiversionKeepBasisData7,DiversionKeepBasisData8,btKeepDistance,KeepDistanceData,btTraceType,btTraceBoundary,TraceData,btHomingType,HomingData,btAggressTypeOnHoming,btFleeType,dwChampionTacticsID,AdditionOptionFlag,szDescString128) VALUES
(@MAXTACTICS,@MOBID,0,500,50,200,0,0,2,2,2,0,0,5,0,0,0,0,0,30,0,0,4,0,0,0,0,0,0,0,0,0,0,0,1,500,0,0,2,0,0,112,@UNIQUE)
SET IDENTITY_INSERT Tab_RefTactics OFF
SET IDENTITY_INSERT Tab_RefHive ON
INSERT INTO Tab_RefHive (dwHiveID,btKeepMonsterCountType,dwOverwriteMaxTotalCount,fMonsterCountPerPC,dwSpawnSpeedIncreaseRate,dwMaxIncreaseRate,btFlag,GameWorldID,HatchObjType,szDescString128) VALUES
(@MAXHIVE,0,1,0,0,0,0,1,1,@UNIQUE)
SET IDENTITY_INSERT Tab_RefHive OFF
/* get position coordinates of your character */
DECLARE @REGION INT SET @REGION = (SELECT (LatestRegion) FROM _Char WHERE CharName16 = @CHARNAME)
DECLARE @POSX INT SET @POSX = (SELECT (POSX) FROM _Char WHERE CharName16 = @CHARNAME)
DECLARE @POSY INT SET @POSY = (SELECT (POSY) FROM _Char WHERE CharName16 = @CHARNAME)
DECLARE @POSZ INT SET @POSZ = (SELECT (POSZ) FROM _Char WHERE CharName16 = @CHARNAME)
SET IDENTITY_INSERT Tab_RefNest ON
INSERT INTO Tab_RefNest (dwNestID,dwHiveID,dwTacticsID,nRegionDBID,fLocalPosX,fLocalPosY,fLocalPosZ,wInitialDir,nRadius,nGenerateRadius,nChampionGenPercentage,dwDelayTimeMin,dwDelayTimeMax,dwMaxTotalCount,btFlag,btRespawn,btType) VALUES
(@MAXNEST,@MAXHIVE,@MAXTACTICS,@REGION,@POSX,@POSY,@POSZ,0,@RADIUS,@INITRADIUS,0,@mindealy,@maxdelay,1,0,1,0)
SET IDENTITY_INSERT Tab_RefNest OFF
print ''
|
