طلب هام

[Kingof30]

1-عايز اعمل Start Item معين للEroupe و Start Item معين للChinese ازاي و انا نزلت سيرفرات كتير كانت عمله الحكاية ديه
2-عايز اشيل Item (Weapon Set.Etc) l من Npc
3-عايز اضيف Item لل NPC
4-عايز احذف NPC اخفي بس مش لازم اشيلو
5-و انا عملت Add لي State Scroll و لما اضربها مش بتعمل حاجة و انا عامل البرديوس تمام

[Kingof30]

UP

[Dev.Ri3o]

بالنسبة لإزالة اى Item من NPC هتشيل ال سطور بتاعتو من هنا
RefpackageItem
RefScarpOfPackageItem
RefPricePolicyOfItem
RefShopGoods
ولو عايز تضيف Item فى ال NPC يا اما تستخد الطريقة اليدوية هنا
عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]
او تستخدم ال Query ده

USE SRO_VT_SHARD -----Mr.Rover-----
GO
DECLARE @ID int
DECLARE @INDEX int
DECLARE @CodeName varchar(128)
DECLARE @PackageName varchar(128)
DECLARE @DescSTRID varchar(128)
DECLARE @File varchar(128)
DECLARE @Price int
DECLARE @SilkPrice int
DECLARE @Slot tinyint
DECLARE @TAB varchar(128)
DECLARE @Data int
DECLARE @SkipScrapOfPackageItem int = 0
DECLARE @SkipPackageItem int = 0
DECLARE @SkipPricePolicyOfItem int = 0
--- Set Variables
SET @CodeName = 'ITEM_MALL_GODBLESS' -- Item CodeName in RefObjCommon
SET @Price = 1 -- Set 0 if you don't want to set Gold Price
SET @SilkPrice = 10 -- Set 0 if you don't want to set Silk Price
SET @TAB = 'STORE_STONE_TAB1' -- Tab name in NPC, For _RefShopGoods
SET @PackageName = 'PACKAGE_'+@CodeName -- Do not edit if you don't know what are you doing.
--- you don't need to touch here...
IF (@CodeName = '')
BEGIN
    PRINT 'You have to edit CodeName..!'
    PRINT 'FAILED.'
    RETURN
END
IF ((SELECT COUNT(ID) FROM _RefObjCommon WHERE CodeName128 = @CodeName) < 1)
BEGIN
    PRINT 'There is no item with this CodeName..!'
    PRINT 'FAILED.'
    RETURN
END
IF (@Price < 0)
BEGIN
    PRINT 'Price is not VALID..!'
    PRINT 'FAILED.'
    RETURN
END
IF (@SilkPrice < 0)
BEGIN
    PRINT 'Silk Price is not VALID..!'
    PRINT 'FAILED.'
    RETURN
END
IF ((SELECT COUNT(ID) FROM _RefShopTab WHERE CodeName128 = @TAB) < 1)
BEGIN
    PRINT 'TAB VALUE IS NOT VALID..!'
    PRINT 'FAILED.'
    RETURN
END
IF ((SELECT COUNT (RefPackageItemCodeName) FROM _RefShopGoods WHERE RefPackageItemCodeName = @PackageName AND RefTabCodeName = @TAB) > 0)
BEGIN
    PRINT 'There is already same item in same tab..!'
    PRINT 'FAILED.'
    RETURN
END
IF ((SELECT COUNT (RefPackageItemCodeName) FROM _RefScrapOfPackageItem WHERE RefPackageItemCodeName = @PackageName) > 0)
BEGIN
    PRINT 'There is already an entry for this item, skipping @_RefScrapOfPackageItem table..!'
    SET @SkipScrapOfPackageItem = 1
END
IF ((SELECT COUNT (CodeName128) FROM _RefPackageItem WHERE CodeName128 = @PackageName) > 0)
BEGIN
    PRINT 'There is already an entry for this item, skipping @_RefPackageItem table..!'
    SET @SkipPackageItem = 1
END
IF ((SELECT COUNT (PaymentDevice) FROM _RefPricePolicyOfItem WHERE RefPackageItemCodeName = @PackageName AND PaymentDevice = '1') > 0)
BEGIN
    PRINT 'There is already an entry for this item with same PaymentDevice, skipping @_RefPricePolicyOfItem table..! (Gold)'
    SET @SkipPricePolicyOfItem = 1
END
IF ((SELECT COUNT (PaymentDevice) FROM _RefPricePolicyOfItem WHERE RefPackageItemCodeName = @PackageName AND PaymentDevice = '2') > 0)
BEGIN
    PRINT 'There is already an entry for this item with same PaymentDevice, skipping @_RefPricePolicyOfItem table..! (Silk)'
    IF (@SkipPricePolicyOfItem = 1)
    BEGIN
        SET @SkipPricePolicyOfItem = 3
    END
    ELSE
    BEGIN
        SET @SkipPricePolicyOfItem = 2
    END
END
IF (@SilkPrice = 0) AND (@Price = 0)
BEGIN
    PRINT 'You need to set a price, at least one !'
    PRINT 'FAILED.'
    RETURN
END
SELECT TOP 1 @ID = ID FROM _RefPackageItem ORDER BY ID DESC
SET @ID = @ID + 1
SELECT TOP 1 @INDEX = [Index] FROM _RefScrapOfPackageItem ORDER BY [Index] DESC
SET @INDEX = @INDEX + 1
SELECT TOP 1 @Slot = SlotIndex FROM _RefShopGoods WHERE RefTabCodeName = @TAB ORDER BY SlotIndex DESC
IF (@Slot = 0)
BEGIN
    SET @Slot = @Slot + 1
END
ELSE IF (@Slot > 0)
BEGIN
    SET @Slot = @Slot + 1
END
ELSE
BEGIN
    SET @Slot = 0
END
SET @DescSTRID = 'SN_' + @CodeName + '_TT_DESC'
SELECT @File = AssocFileIcon128 FROM _RefObjCommon WHERE CodeName128 = @CodeName
IF (@CodeName LIKE '%RING%' OR @CodeName LIKE '%NECKLACE%' OR @CodeName LIKE '%ARCHEMY%')
BEGIN
    SET @Data = 1
END
ELSE
BEGIN
    SELECT @Data = Dur_U FROM _RefObjItem WHERE ID = (SELECT Link FROM _RefObjCommon WHERE CodeName128 = @CodeName)
END
BEGIN TRANSACTION
IF (@SkipPackageItem = 0)
BEGIN
    --SET IDENTITY_INSERT _RefPackageItem ON
    INSERT _RefPackageItem ([Service], Country, ID, CodeName128, SaleTag, ExpandTerm, NameStrID, DescStrID, AssocFileIcon, Param1, Param1_Desc128, Param2, Param2_Desc128, Param3, Param3_Desc128, Param4, Param4_Desc128) VALUES (1, 15, @ID, @PackageName, 0, 'EXPAND_TERM_ALL', 'SN_'+@CodeName, @DescSTRID, @File, -1, 'xxx', -1, 'xxx', -1, 'xxx', -1, 'xxx')
        IF (@@ERROR <> 0)  
        BEGIN
            PRINT 'AN ERROR HAPPENED WHILE ADDING TO _RefPackageItem, Rolling back...'
            ROLLBACK TRANSACTION
            RETURN
        END
    PRINT 'Added to _RefPackageItem !'
    --SET IDENTITY_INSERT _RefPackageItem OFF
END
IF (@SkipScrapOfPackageItem = 0)
BEGIN
    INSERT _RefScrapOfPackageItem (Service, Country, RefPackageItemCodeName, RefItemCodeName, OptLevel, Variance, Data, MagParamNum, MagParam1, MagParam2, MagParam3, MagParam4, MagParam5, MagParam6, MagParam7, MagParam8, MagParam9, MagParam10, MagParam11, MagParam12, Param1, Param1_Desc128, Param2, Param2_Desc128, Param3, Param3_Desc128, Param4, Param4_Desc128, [Index]) VALUES (1, 15, @PackageName, @CodeName, 0, 0, @Data, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, 'xxx', -1, 'xxx', -1, 'xxx', -1, 'xxx', @INDEX)
        IF (@@ERROR <> 0)  
        BEGIN
            PRINT 'AN ERROR HAPPENED WHILE ADDING TO _RefScrapOfPackageItem, Rolling back...'
            ROLLBACK TRANSACTION
            RETURN
        END
    PRINT 'Added to _RefScrapOfPackageItem !'
END
IF (@SkipPricePolicyOfItem = 2 OR @SkipPricePolicyOfItem = 0 AND @Price > 0)
BEGIN
    INSERT _RefPricePolicyOfItem (Service, Country, RefPackageItemCodeName, PaymentDevice, PreviousCost, Cost, Param1, Param1_Desc128, Param2, Param2_Desc128, Param3, Param3_Desc128, Param4, Param4_Desc128) VALUES (1, 15, @PackageName, 1, 0, @Price, -1, 'xxx', -1, 'xxx', -1, 'xxx', -1, 'xxx')
        IF (@@ERROR <> 0)  
        BEGIN
            PRINT 'AN ERROR HAPPENED WHILE ADDING TO _RefPricePolicyOfItem, Rolling back...'
            ROLLBACK TRANSACTION
            RETURN
        END
    PRINT 'Added to _RefPricePolicyOfItem, PaymentDevice = 1 (Gold)'
END
IF (@SkipPricePolicyOfItem = 1 OR @SkipPricePolicyOfItem = 0 AND @SilkPrice > 0)
BEGIN
    INSERT _RefPricePolicyOfItem (Service, Country, RefPackageItemCodeName, PaymentDevice, PreviousCost, Cost, Param1, Param1_Desc128, Param2, Param2_Desc128, Param3, Param3_Desc128, Param4, Param4_Desc128) VALUES (1, 15, @PackageName, 2, 0, @SilkPrice, -1, 'xxx', -1, 'xxx', -1, 'xxx', -1, 'xxx')
        IF (@@ERROR <> 0)  
        BEGIN
            PRINT 'AN ERROR HAPPENED WHILE ADDING TO _RefPricePolicyOfItem, Rolling back...'
            ROLLBACK TRANSACTION
            RETURN
        END
    PRINT 'Added to _RefPricePolicyOfItem, PaymentDevice = 2 (Silk)'
END
ELSE
BEGIN
    PRINT 'There is already silk / gold price, skipping _RefPricePolicyOfItem table...'
END
INSERT _RefShopGoods (Service, Country, RefTabCodeName, RefPackageItemCodeName, SlotIndex, Param1, Param1_Desc128, Param2, Param2_Desc128, Param3, Param3_Desc128, Param4, Param4_Desc128) VALUES (1, 15, @TAB, @PackageName, @Slot, -1, 'xxx', -1, 'xxx', -1, 'xxx', -1, 'xxx')
    IF (@@ERROR <> 0)  
    BEGIN
        PRINT 'An error happened while adding to _RefShopGoods table'
        PRINT 'FAILED.'
        ROLLBACK TRANSACTION
        RETURN
    END
    PRINT 'Added to _RefShopGoods, DONE!'
COMMIT TRANSACTION

لو استخدمت الطريقة اليدوية بعد اما تحط ال lines فى ال database هتاخدها Copy وتحطها فى ال media
لو استخدمت ال Query عشان ميجلكش Crash فى ال Sro Client بعد اما تخلص بال Query فى ال Database هتاخد كل Table انت عدلت فى كلو Copy وتشيل اللى عندك فى ال Media وتحط اللى فى ال Database مكانو Past وده فى كل ال Tables
وبالنسبة لانك شيل NPC
هتعمل ال Query ده

Use SRO_VT_SHARD select ID from _RefObjCommon where CodeName128 like 'MOB_RM_ROC'

وهتكتب Code ال NPC عشان تجيب ال ID بتاعو بعد كدة هتشيل ال Spot بتاعو بال Query ده

USE SRO_VT_SHARD
Go
delete from Tab_RefNest 
where dwTacticsID=(Select dwTacticsID from Tab_RefTactics where dwObjID='12345')

وبالنسبة لل Scroll State اتأكد من ال IDs وكمان مش IDs ال RefObjCommon على اللى بتتكتب انت بتكت IDs ال RefSkill وبتحط ال Procedure تحت كلمة As يعن تيجى جنبها وتدوس Enter وبعد كدة تحطها

[Kingof30]

المشاركة الأصلية كتبت بواسطة ameral عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ]

وبالنسبة لل Scroll State اتأكد من ال IDs وكمان مش IDs ال RefObjCommon على اللى بتتكتب انت بتكت IDs ال RefSkill وبتحط ال Procedure تحت كلمة As يعن تيجى جنبها وتدوس Enter وبعد كدة تحطها

معلش حضرتك هوا الموضوع بتاع عفوا ,,, لايمكنك مشاهده الروابط لانك غير مسجل لدينا [ للتسجيل اضغط هنا ] مفهوش RefSkill و هوا انا بحوط الProcedure في Sro_VT_SHARD ولا SRO_VT_SHARDLOG

[Kingof30]

Up

[Dev.Ri3o]

ماشى تمام هو عامل ال Procedure فى ال AddLogItem يعنى تعمل ال Procedure وتحطو تحت كلمة As وتخلى ال IDs بتاعة ال RefObjCommon وبتحطها فى ال SRO_VT_SHARDLOG

[Dev.Ri3o]

##